Lines Displayed changes when Converting between "Wrap by Window" to "No Wrap"

Procedure to make Lines Displayed changes when Converting between “Wrap by Window” to “No Wrap”:
1. Open a *.TXT File (Manually Select “Wrap by Window Width”).
2. Open a *.CSV File (Automatically Selects “No Wrap”).
3. The *.TXT Document Lines Displayed will have Changed based off the Number of Wrapped Lines above the First Line Originally Displayed.

The problem is when you Open a *.CSV File, EmEditor always Defaults to No Wrap. If you have Tick “Synchronize Wrap Mode” (“Tools” Drop-down Menu => Customize => “View” Tab => Tick “Synchronize Wrap Mode”) any *.TXT Documents set to “Wrap by Window Width” will be changed to “No Wrap”. Then a Bug in EmEditor shifts the Displayed Lines in the *.TXT File down by however many Line Wraps there were Above the Top Row shown in the EmEditor Window before the *.CSV File was Opened (Wrapped Lines Below the Top Row have no effect).

Hence this Bug doesn’t happen if:
* You have No Line Wraps in the *.TXT Document Above the Top Row shown in the EmEditor Window before the *.CSV File was Opened.
* The Top Line in the *.TXT Document was Line 1.

The Cursor Position stays the Same in the *.TXT Document before & after the *.CSV File is opened. Its just the Lines shown in the EmEditor Window changes.

This is an example of the Lines Displayed Shift on a 1000 Line Text Document with 1 Line Wrap on each Line:
Top Line in *.TXT Before *.CSV Opened: Top Line in *.TXT After *.CSV Opened:
50 99
100 199
150 299
200 399
250 499
300 599

This Bug happens wheather you have “Line and Column Display as” either “Display Coordinates”, “Logical Coord. (Full-width Char. as 2 Col)”, “Logical Coord. (Full-width Char. as 1 Col)”, “Logical w/Tab (Full-width Char. as 1 Col)”.

The only work around to this Bug I’ve found is: “Tools” Drop-down Menu => Customize => “View” Tab => Untick “Synchronize Wrap Mode”.

This was Tested in EmEditor 17.5, however it has been around for a long time.