Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #4099

    jtgarrett
    Member

    Is it possible to get EmEditor to display a right margin guide? (for instance, such as a gray line going down the page at column 80)

    Thanks!

    #4101

    Yutaka Emura
    Keymaster

    You might want to change the background color of the Outside of regions. (Properties -> Display)

    #4114

    rayd
    Member

    For some reason, this puts the colour 2 characters outside of the right margin setting.

    I set the right margin to 30 characters and the outside colour starts at 32.

    Is this correct behaviour?

    Ray D

    #4118

    Yutaka Emura
    Keymaster

    That is true to accomodate Not Allowed at Line Head characters you can define on the Wrap tab of Properties.

    #4134

    rayd
    Member

    Is it possible to remove those two blank characters and have the outside colour start at the right matgin?

    I produce braille pages which are 30 characters wide, with a CR/LF at the end of every line. To make sure I don’t exceed the 30 characters, it is useful to have the outside bit greyed. At the moment, I have a 2 character white band before the grey which rather negates the usefulness of the outside colour.

    Ray D

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.

Share with friends... Tweet about this on TwitterShare on FacebookShare on Google+Email this to someone