Viewing 15 posts - 1 through 15 (of 17 total)
  • Author
    Posts
  • #19431

    Yutaka Emura
    Keymaster

    Today, we are releasing EmEditor Professional v14.6.0 beta 17.

    Updates from v14.6.0 beta 16 include:

    • The Prefer UTF-8 check box was added to the File tab of configuration properties. When this is checked and the Detect UTF-8 check box is also checked, UTF-8 takes precedence if the file can be interpreted both as UTF-8 and the selected encoding. For example, a file contains only ANSI characters (alphabets and numbers), it can be opened without any problems both as UTF-8 and Western European. In this situation, EmEditor opens the file as UTF-8. EmEditor also opens an empty file as UTF-8 if this is checked.
    • Stability improvements.

    To Download

    http://www.emurasoft.com/pub/emed64_14.5.916.exe (64-bit)
    http://www.emurasoft.com/pub/emed32_14.5.916.exe (32-bit)

    These files will be deleted when official release versions become available. The official releases can be downloaded at the Download page.

    How to create portable version:

    http://www.emeditor.com/support/#toggle-id-12

    Thank you for continue using EmEditor!

    #19436

    Yutaka Emura
    Keymaster

    Today, we are releasing EmEditor v14.6.0 beta 18.

    Updates from v14.6.0 beta 17 include:

    • Macros: The eeFindExtract and eeFindReplaceSelOnly flags were added to the Find method.
    • Stability improvements.

    To Download

    http://www.emurasoft.com/pub/emed64_14.5.917.exe (64-bit)
    http://www.emurasoft.com/pub/emed32_14.5.917.exe (32-bit)

    These files will be deleted when official release versions become available. The official releases can be downloaded at the Download page.

    How to create portable version:

    http://www.emeditor.com/support/#toggle-id-12

    Thank you for continue using EmEditor!

    #19439

    Rien van Ham
    Participant

    Hello Yutaka,

    The progessbar in dialog “Sorting” is not equal to the progress in numbers, e.g.:
    Sorting (2/3)
    29 / 125
    Progressbar shows 41%.

    I’ve never seen (in many sortings) that the progressbar reaches 100%.

    Thanks in advance!

    #19440

    Rien van Ham
    Participant

    Feature request:

    Hello Yutaka,

    Every day I do a lot of Find- and Replace actions with big logfiles.

    Could you please have a look at:
    – creating favorites (so, Find- and Replacestring which will be saved under a logic name) (please have a look at UltraEdit)
    – increasing the historie to (lets say) 128 items? or perhaps more?

    Thanks in advance,

    Rien van Ham

    #19441

    Yutaka Emura
    Keymaster

    Hello Rien van Ham,

    I believe the progress bar is correct, but the last step (3/3) finishes immediately. It makes difference when you sort even larger files.

    I will think about your search feature requests in the future. You might want to use macros to define several searches, and you can just run those macros. You can also define “markers” on the Marker toolbar, and pressing a marker button will search the string.

    Thanks,

    #19444

    Rien van Ham
    Participant

    Hello Yutaka,

    Again I missed something or I have a feature request:

    In my sourcecode (yes, I’m also a developer) very often I’m putting in comments with EmEditor. A handy feature are the snippets, but with the time and date objects I’m missing a format method.

    It would be very nice if I could use (e.g.) ${Date.format(“dd-mm-yyyy”)} or ${Time.format(“hh:mm:ss”)} (like the .net format method so it writes the date and timestrings in my own format, and not the format of Windows.

    Thanks again!

    RIen

    #19445

    Yutaka Emura
    Keymaster

    Today, we are releasing EmEditor v14.6.0 beta 19.

    Updates from v14.6.0 beta 18 include:

    • The Updater feature was restored. The new Updater installs only digitally signed update packages signed with the same certificate as the Updater.
    • Stability improvements.

    To Download

    http://www.emurasoft.com/pub/emed64_14.5.918.exe (64-bit)
    http://www.emurasoft.com/pub/emed32_14.5.918.exe (32-bit)

    These files will be deleted when official release versions become available. The official releases can be downloaded at the Download page.

    How to create portable version:

    http://www.emeditor.com/support/#toggle-id-12

    Thank you for continue using EmEditor!

    #19449

    Yutaka Emura
    Keymaster

    EmEditor v14.6.0 beta 20 released!

    Today, we are releasing EmEditor v14.6.0 beta 20.

    Updates from v14.6.0 beta 19 include:

    • The Updater feature was restored. The new Updater installs only digitally signed update packages signed with the same certificate as the Updater.
    • Stability improvements.

    To Download

    If you have already installed beta 19, you can select “Check for Updates” on the Help menu.

    http://www.emurasoft.com/pub/emed64_14.5.919.exe (64-bit)
    http://www.emurasoft.com/pub/emed32_14.5.919.exe (32-bit)

    These files will be deleted when official release versions become available. The official releases can be downloaded at the Download page.

    How to create portable version:

    http://www.emeditor.com/support/#toggle-id-12

    Thank you for continue using EmEditor!

    #19450

    Pangius
    Participant

    Since EmEditor v14.6.0 beta 18 (when “Macros: The eeFindExtract and eeFindReplaceSelOnly flags were added to the Find method” was added) the Find Toolbar & Find do not work. It will Count the number of Search Instances. However it will not go to the Next Instance, plus the Find Previous & Find Next do not work.

    #19456

    Yutaka Emura
    Keymaster

    Hello Pangius,

    I reproduced the issue, and it will be fixed on the next beta.

    Thank you!

    #19460

    Yutaka Emura
    Keymaster

    EmEditor v14.6.0 beta 21 released!

    Today, we are releasing EmEditor v14.6.0 beta 21.

    Updates from v14.6.0 beta 20 include:

    • Fixed the bug of EmEditor v11.6.0 beta 18-20 where Find Next or Find Previous commands do not move the cursor position if the Count Matches is checked.
    • Fixed the bug of EmEditor v11.6.0 beta 18-20 where the Replace All command might not work if the In the Selection Only option is set.
    • Fixed the bug of EmEditor v11.6.0 beta where the Notepad Compatible Diary option did not work.

    To Download

    http://www.emurasoft.com/pub/emed64_14.5.920.exe (64-bit)
    http://www.emurasoft.com/pub/emed32_14.5.920.exe (32-bit)

    These files will be deleted when official release versions become available. The official releases can be downloaded at the Download page.

    How to create portable version:

    http://www.emeditor.com/support/#toggle-id-12

    Thank you for continue using EmEditor!

    #19461

    Pangius
    Participant

    Thanks Yutaka for the quick fix – it now is working correctly again.

    #19489

    Yutaka Emura
    Keymaster

    Today, we are releasing EmEditor v14.6.0 beta 22.

    Updates from v14.6.0 beta 21 include:

    • Fixed the bug where the first sort command might not have sort the specified column.
    • Tried not to show the “Undo or Redo data will not be available” message, and optimization.
    • Sort commands are now disabled while filtered.
    • Fixed the bug where the Replace might not have worked correctly when the In the Selection Only check box is set in the Replace dialog.

    To Download

    http://www.emurasoft.com/pub/emed64_14.5.921.exe (64-bit)
    http://www.emurasoft.com/pub/emed32_14.5.921.exe (32-bit)

    These files will be deleted when official release versions become available. The official releases can be downloaded at the Download page.

    How to create portable version:

    http://www.emeditor.com/support/#toggle-id-12

    Thank you for continue using EmEditor!

    #19501

    Yutaka Emura
    Keymaster

    Today, we are releasing EmEditor v14.6.0 beta 23.

    Updates from v14.6.0 beta 22 include:

    • Fixed the bug where multiple selection positions after Replace All might have been wrong.
    • Fixed the bug where the Undo after vertical selection might not have worked correctly.

    To Download

    http://www.emurasoft.com/pub/emed64_14.5.922.exe (64-bit)
    http://www.emurasoft.com/pub/emed32_14.5.922.exe (32-bit)

    These files will be deleted when official release versions become available. The official releases can be downloaded at the Download page.

    How to create portable version:

    http://www.emeditor.com/support/#toggle-id-12

    Thank you for continue using EmEditor!

    #19502

    Pangius
    Participant

    With the “Find Extract All” Method it Copies the whole Line where the Search Term was found – which is good for some instances.

    However in some instances it would be good to just copy each Search Instance on to a New Line.

    For example to Find the Date (in the follow text) when written in the Day-Month-Year Format via RegEx is “[0-9].*?2014″:

    On the 1 June 2014 travelled to Australia.
    On the 2 June 2014 travelled to New Zealand.

    Using the RegEx “[0-9].*?2014” and pressing “Extract All” will just return the original Text (i.e. each line that contains the Search Term):

    On the 1 June 2014 travelled to Australia.
    On the 2 June 2014 travelled to New Zealand.

    Using the RegEx “[0-9].*?2014” and pressing “Find All” => then Copy all Found Matches, and Pasting the results into a New Text Document – will put all the Search Results on to the 1 Line:

    1 June 20142 June 2014

    Hence it would be good to have a Method to Extract All to just Extract each Search Result to a New Line e.g.

    1 June 2014
    2 June 2014

Viewing 15 posts - 1 through 15 (of 17 total)

You must be logged in to reply to this topic.

Share with friends... Tweet about this on TwitterShare on FacebookShare on Google+Email this to someone