Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #23759

    LTT
    Participant

    Suggestion 1:
    I hope the view will not scroll horizontally (if not necessary, e.g. the current cursor position is already in the view) when any of the commands below is triggered:
    Filter with/without Selection or Word at Cursor.
    Abort/Refresh Filtering.
    Close Filter Toolbar.

    Suggestion 2:
    “Keep Horizontal Cursor Position” is enabled.
    Is it possible to make it keep the position after “Filter without Selection or Word at Cursor” command is trigged?

    #23799

    Yutaka Emura
    Keymaster

    Suggestion 1 and 2: I can’t reproduce the issues. Are you opening CSV files or non-CSV files? Can you write detailed steps to reproduce the issues?

    #23831

    LTT
    Participant

    > Suggestion 1:
    Put the text below into EmEditor and follow the description in it:

    1,<
    1,<
    1,<
    1,<
    1,<
    1,<
    1,<
    1,<
    1,<
    1,< (Line 10)
    1,Scroll down and make the above 10 lines invisible.
    1,CSV mode.
    1,Make this cell long enough (or narrow the window) so that the text goes beyond the right edge and the horizontal scroll is available.
    1,Scroll to leftmost so that the 1st column is totally visible.
    1,-
    1,-
    1,-
    1,-
    1,-
    1,-
    1,- (Line 20)
    1,<
    1,<
    1,<
    1,<
    1,<
    1,<
    1,<
    1,<
    1,<
    1,Put cursor here->< (Line 30)
    1,Filter with "<".

    Result:
    ** The view scrolled horizontally and the 1st column is invisible.
    ** The current vertical relative position also changed, which I think should also be prevented if possible.

    —————
    > Suggestion 2:
    Normal or CSV mode.
    Put cursor within “cursor” in the sample text.
    Use “Filter without Selection or Word at Cursor” command.

    #23840

    Yutaka Emura
    Keymaster

    Thanks for explanation. I see you are not using Cell Selection Mode. These issues will be addressed on the next version.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.