Read this first if you are having trouble installing EmEditor
Read this first if you are having trouble installing EmEditor
If you are having trouble installing, uninstalling or updating EmEditor, please refer to the following tips. We apologize for any inconveniences.
- If you use Trend Micro, Avast, or any other Antivirus or Security software, temporarily disable the software and install EmEditor.
- Close all currently running programs including icons in the Taskbar notification area.
- Check if the Windows system is up to date by Update Windows, and then restart Windows.
- Use the Disk Cleanup to clean system files. To start Disk Cleanup, search for Disk Cleanup from the Start menu, click the Clean up system files, and clean all files.
- Delete all files in the %TEMP% folder, and restart Windows.
- If the error message that says “The feature you are trying to use is on a network resource that is unavailable.” appears while trying to update or install EmEditor, first locate the installer of the previous version. The installer of the previous version can be found in one of the C:\ProgramData\Emurasoft\EmEditor\updates\update… folders. Some old versions can be downloaded at http://files.emeditor.com/emed64_xx.x.x.exe (64-bit) or http://files.emeditor.com/emed32_xx.x.x.exe (32-bit) where “x” represents a version number. For instance, in case of v15.6.1 (64-bit), it becomes http://files.emeditor.com/emed64_15.6.1.exe. Extract the installer with the “/extract” option in Command Prompt. For example, if the installer is “emed64_15.6.1.exe”, you would run: “emed64_15.6.1.exe /extract”. This will create a sub folder with file contents. Inside the folder, you will find a file with the file extension “.msi”, in this case “emed64_15.6.1.msi“. Click the Browse button in the above dialog box, and specify the .msi file.
- If unable to update, first uninstall the old version from Control Panel, and restart Windows. Make sure the old EmEditor install folder is empty (usually C:\Program Files\EmEditor or %LOCALAPPDATA%\Programs\EmEditor), and then install a new version.
- Use Microsoft Fix it tool to check the system for Windows Installer.
- Check the hard disk by Chkdsk command in the Command Prompt run as administrator. This process might take several hours.
- Check the system by sfc /SCANNOW command in the Command Prompt run as administrator. This process might take several hours.
- The Windows System Restore might be able to restore your computer settings to an earlier date.
- If there are permission issues while trying to uninstall EmEditor, try creating a new administrative account, and uninstall with the new account.
- GeekUninstaller (freeware) or Revo Uninstaller (freeware) might be able to help you uninstall an old version.
- If the Check for Updates fails, select Customize Update Checker on the Help menu, and make sure the Download Folder specifies a writable folder. The default is C:\ProgramData\Emurasoft\EmEditor\updates.
If it still fails, please download the newest version, and run the downloaded installer.
- When updating EmEditor, if a system restart is required, close all applications before updating EmEditor. In particular, Brother Control Center (BrCtrlCntr.exe), which comes with Brother printers, might open the EmEditor folder, and thus please close the Control Center you might find in the Taskbar Notification Area. If the problem persists, use Process Explorer and search for any open handles to the EmEditor install folder when a system restart is prompted.
- To report issues during the install, run the installer with the “/L*V log.txt” option. For instance, if the installer is emed64_21.0.0.msi, run “msiexec /i emed64_21.0.0.msi /L*V log.txt”. If installing to the whole computer, the Command Prompt is required to run as Administrator. To report issues during the uninstall, run the installer corresponding to the version you want to uninstall with the “/L*V log.txt” option. Zip the log file “log.txt”, and email to our support at tech at emurasoft.com with detail information.
- If EmEditor complains that “eeupdate.exe” is missing during EmEditor install or launching EmEditor, Antivirus software seemed to delete the eeupdate.exe file while EmEditor was installed or launched. Please consider disabling the antivirus while installing EmEditor, or add the file to exception list of the antivirus. If this doesn’t work, you can install EmEditor without copying eeupdate.exe. To do this, when you install, select “Custom” install, in the Custom Setup screen, expand the “Program Shortcuts and Association” and disable “Check Updates”. Alternatively, you can create the “CheckUpdates” value as REG_DWORD in the HKEY_LOCAL_MACHINE\SOFTWARE\EmSoft\EmEditor v3\Common key, and assign 0. Either of the above methods will completely disable the update checker and the eeupdate.exe will not be searched anymore.
- If the “Called RunScript when not marked in progress.” message appears, please check the permissions include writable on C:\Windows\Temp folder.
- If you run EmEditor on a PC where the Internet connection is unavailable, you might run into an issue such as:
– A warning dialog box “The digital signature of a program file could not be verified.” appears when you try to launch EmEditor.
– The digital signature of EmEditor files (such as emeditor.exe and .msi installers) cannot be verified.
– EmEditor launch becomes slow.
- By default, EmEditor is installed as a per-user install, and EmEditor will be installed to C:/Users/(username)/AppData/Local/Programs/EmEditor. You cannot change this default path unless you select a per-computer install while installing EmEditor. We recommend accepting the default per-user install and the default install path because it will be safer and easier to update in the future.
- By default, the Installation Type dialog in the Installer is disabled, and you cannot select the Everybody (all users) option. We recommend accepting the default per-user install because it will be safer and easier to update in the future. However, if you really need to select the Everybody (all users) option while installing EmEditor, you must specify MSIINSTALLPERUSER=”” option in the command line. For instance, if the EmEditor installation file is emed64_21.1.0.msi, you will need to press Win(⊞)+R keys to bring up the Run dialog box, and enter the following command:
msiexec /i "(...path...)emed64_21.1.0.msi" MSIINSTALLPERUSER=""
Can you tell me how to install the new version of EmEditor?
You can install the new version of EmEditor by downloading the latest version from the EmEditor Home page. The steps are as follows:
1. If the tray icon is running, close it. To close the tray icon, right click on the tray icon on the task bar, and select Close Tray Icon.
2. Uninstall the previous version of EmEditor from Control Panel.
3. If the message box “Do you want to keep EmEditor settings before they are completely uninstalled?” appears, select “Yes” if you need to keep all your previous settings. It is recommended to select “No” unless you need to keep all your previous settings.
4. Select the type of EmEditor and the version of OS that you want by clicking one of the following links:
5. When you click the link for download, the File Download – Security Warning dialog box appears:
6. Clicking the Run button should start the downloading, and the Internet Explorer – Security Warning dialog box appears:
7. Click Publisher: Emurasoft, Inc.
8. Make sure you read This digital signature is OK in the Digital Signature Details dialog. If this phrase does not appear in the dialog box, the downloaded file is corrupted, and you will need to clear the Temporary Internet files, and try downloading again. Click OK to close the dialog box.
9. Clicking the Run button will launch the Setup. Follow the instructions that appear on the screen to proceed with the setup.
I am using a previous version of EmEditor. Can I install a newer version of EmEditor without uninstalling the previous version?
If you have been using a version of EmEditor v3.00 or newer, and want to maintain the same configurations, you do not need to uninstall the previous version. You can install the newest version with the same destination folder. However, before you install the newer version, you should exit all EmEditor windows including the Tray Icon. If you are asked to restart Windows during the installation, you should restart Windows.
If you have been using a version of EmEditor older than v3.00, or don’t want to maintain the same configurations of EmEditor, we recommend uninstalling the previous version completely and rebooting the computer before installing the newer version of EmEditor. The steps are as follows:
1. Click the Start button and select Control Panel from the Start menu. Select the EmEditor (or EmEditor v3) from the Add or Remove Programs. Click the Delete button.
2. Reboot Windows when uninstalling is complete.
3. Install the new version.
Can both the old version of EmEditor and new version of EmEditor coexist on the same computer?
No. The old version of EmEditor and new version of EmEditor can’t coexist on the same computer.
What do I do if EmEditor crashes when starting or editing?
1. If you have plug-ins installed, remove all plug-ins from the plug-ins folder, and try running EmEditor again.
2. If the problem persists, select Add/Remove Programs in Control Panel to uninstall EmEditor. Reboot your PC, and reinstall EmEditor.
3. If EmEditor crashes only when opening UTF-8 or Unicode files, select Font under the View menu, select Normal from the Character set list, select the Change button beside the Display Font box and check if the proper font is selected.
How can I remove the EmEditor Tray Icon permanently?
Run the EmEditor installation again and make sure the Add the tray icon on the task bar check box is unchecked during the setup. This way you will not see the Tray Icon any more. You do not need to uninstall EmEditor before running the installation again. If this does not work, select Search from the Windows Start menu, and search for “emeditor.lnk”. This file should be located in the Startup folder. Delete this file to remove the tray icon permanently.
How can I install EmEditor without displaying dialog boxes?
During normal installation, dialog boxes will be displayed, and a user must click the “Next” button or set options. However, when you install EmEditor into multiple computers in corporate or group environments, you might want to use a batch or scripting file to automate the installation. EmEditor uses Windows Installer for installation, and the “quiet” installation is possible.
For instance, if the EmEditor installation file is emed64_20.9.0.msi, running the following command:
msiexec /i "(...path...)emed64_20.9.0.msi" /passive MSIINSTALLPERUSER=1
will install EmEditor with default settings without displaying any dialog boxes.
If you wish to change the default settings, you can use following options:
|MSIINSTALLPERUSER=1||Specifies a per-user install for the current user (default on v20.9 or later).|
|MSIINSTALLPERUSER=””||Specifies a per-computer install (default on v20.8 or earlier).|
|NOCHECKUPDATES=1||disables checking new versions of EmEditor periodically via the|
|NOCONTEXTMENU=1||disables adding a shortcut to the Context Menu on Explorer.|
|DESKTOP=1||enables adding a shortcut to the Desktop.|
|NOIEEDITOR=1||disables adding EmEditor to Internet Explorer HTML editor list.|
|NOIEVIEW=1||disables View Source by EmEditor on Internet Explorer.|
|NOPATH=1||disables adding the path to EmEditor to the PATH environment|
|NOSHORTCUT=1||disables adding a shortcut to the Program menu.|
|NOSKIP=1||does not skip installer screens even when upgrading.|
|NOTRAYICON=1||disables the tray icon.|
|NOTXT=1||disables the association of text files.|
|REGNAME=”name”||enters the name of licensee.|
|REGKEY=xxxxxx||enters a registration key.|
For instance, if you wish to install EmEditor only for the current user specifying a registration key and the name of licensee, run the following command:
msiexec /i "emed64_20.9.0.msi" /q MSIINSTALLPERUSER=1 REGKEY=xxxxx REGNAME="John Doe"
If you wish to install EmEditor for all users specifying a registration key and the name of licensee, run the following command on Administrator privilege:
msiexec /i "emed64_20.9.0.msi" /q MSIINSTALLPERUSER="" REGKEY=xxxxx REGNAME="John Doe"
There are many options for Windows Installer. For details, run:
to display the list of available commands.
To install EmEditor for all users, the installer must be run on Administrator privilege to avoid the User Account Control prompt. For instance, If you run the installer from Command Prompt, you will have to open the Command Prompt window by right-clicking the Command Prompt icon while pressing the SHIFT key, and then select Run as administrator. Moveover, you must specify MSIINSTALLPERUSER=”” to install EmEditor v20.9 or later for all users. To install EmEditor v20.8 or earlier only for the current user, you must specify MSIINSTALLPERUSER=1.
How can I change the install folder?
By default, the install folder is the same folder as the previous version, or %LocalAppData%\Programs\EmEditor (if installed per user) or Program Files\EmEditor (if installed per machine) if this is a fresh install. To change the install folder, open the Command Prompt with administrator privileges, and run the installer with the NOSKIP option.
For instance, if the EmEditor installation file is emed64_18.9.3.msi, and if you want to install EmEditor to a different folder, run the following command:
msiexec /i emed64_18.9.3.msi NOSKIP=1
This will give you an opportunity to select the “Custom” install during the install, and then will allow you to change the install folder.
Notes: You can’t change the install folder if EmEditor is installed per user. You must select to install EmEditor for all users.
More than one version of EmEditor cannot coexist on the same computer. If an old version is already installed, you must uninstall the old version first, or install the new version to the same folder as the old version.
How can I install an EmEditor syntax file?
1. Choose Select Configuration under the Tools menu.
2. Click Define Configuration at the very bottom of the list.
3. Click the New button, select Use Default Configuration and click OK.
4. Enter a descriptive name and click Enter.
5. Click the Properties button and select the Highlight (1) tab.
6. Click on the Import button, locate, and open the appropriate syntax file. If the “Import” button is disabled, check if “Only User Defined Strings” or “Both User-Defined Strings and Default Keywords” is selected in the drop-down list box under the “Enable Keyword Highlight”.
7. Finally, click on OK to close the Properties dialog box and click on Close to close the Configurations dialog box.
If you want to enable associated extensions and specify an extension or extensions that EmEditor should associate with the configuration, follow these additional steps:
8. Go to Associate Configuration on the Tools menu.
9. Click the New button.
10. Type the file extension with the wildcard, for example “*.ext”.
11. Select your newly defined configuration name.
I am using a new version (or a new beta version) of EmEditor. Can I install an older version of EmEditor without uninstalling the new version?
No. You should unistall the new version of EmEditor before installing an older version of EmEditor. Failure to do so might cause some new DLL files to remain in the install directory, which can be incompatible with the older version of EmEditor. Before you uninstall the newer version, you should exit all EmEditor windows including the Tray Icon. When you uninstall the new version, you will be asked to keep all the settings. Selecting YES will keep all the settings that may be used in the older version of EmEditor. If you are asked to restart Windows during the installation, you should restart Windows.
How to change associated text file icons?
To change the associated icon, run EmEditor, select Customize on the Tools menu, select the File tab, click the Associate with EmEditor button. Select the “txt” icon in the list, click the Properties button, and select the icon you want to use.
EmEditor does not run.
If Trend Micro Internet Security is installed, and the latest security update is installed, EmEditor may not run. Uninstalling Trend Micro Internet Security or removing the shortcut to Trend Micro Internet Security on the Desktop will resolve this issue.
Crack, Keygen, Serial
Please go to Crack, Keygen, Serial.
When I try to install EmEditor, the "Error deleting file" message appears and cannot continue.
The "User Account Control (UAC) prompts are required to update" notification appears when EmEditor is launched. How should I respond to this?
If you don’t mind the UAC prompts during future updates, you can simply ignore this notification by clicking the “Do not show this notification again” link. On the other hand, if you would like to avoid the UAC prompts in the future, you should uninstall the current copy of EmEditor first, and then install EmEditor as a per-user install. When you uninstall, a message box appears to ask whether you want to save all your settings. Selecting YES on this message box will leave all your settings during uninstall and will become available when you install EmEditor again. A per-user install is the default install of EmEditor, and you don’t need to select any additional options while you install EmEditor. You might need to enter your registration key again when you launch EmEditor after reinstall.
How can I disable EmEditor from the context menu displayed when you right-click on Explorer?
Please clear the “Add a shortcut to the Context Menu on Explorer” check box in the “Shortcut” page of the Customize dialog box. If this option is grayed out because EmEditor was installed per computer, uninstall EmEditor first, then install EmEditor again, but select the CUSTOM install. You will find an option to clear the Context Menu.
I was using EmEditor on a trial basis and decided I don’t want to purchase it. How do I uninstall EmEditor?
Close all running EmEditor programs (Note that EmEditor Help will be closed as well. If you are reading this page from the Help, we recommend writing down the information on this page before closing). Click the Start button on the Windows Operating System and select Control Panel from the Start menu. Select Add or Remove Programs. Select EmEditor from the Add or Remove Programs dialog box. and then click the Delete button. Follow the instructions in the EmEditor Uninstall dialog box. We recommend restarting the Windows Operating System when the uninstalling is complete.
I have uninstalled EmEditor. When I double click a file to open the file, my computer looks for EmEditor. Since EmEditor does not exist in my computer anymore, I can’t open the file. How do I open such a file?
If you associate files using Associate with EmEditor in EmEditor, the original associations are supposed to be restored after having uninstalled EmEditor. However, if you associate files yourself in other applications such as Explorer, you need to restore the original associations yourself. Open Windows Explorer, click Tools, select Folder Options, and then click the File Types tab. Select extensions you want to delete in the Registered file types list box and click the Change button. In the resulting Open With dialog box, select a program other than EmEditor that you want to associate the file with.
I cannot uninstall an older version of EmEditor from the "Add or Remove Programs" of Control Panel. How can I uninstall the older version?
If you can’t uninstall an older version, please run the installer for the old version with “/L*V log.txt” option, which will create a log file for uninstall. For example, if the installer is “emed64_14.3.1.exe”, please run:
emed64_14.3.1.exe /L*V log.txt
The log.txt file might contain useful information as to why the installer stops working.
Notes: The installer of the previous version can be found in one of the C:\ProgramData\Emurasoft\EmEditor\updates\update… folders.
If you get the following dialog box while trying to uninstall or install a new version:
“The feature you are trying to use is on a network resource that is unavailable.”
First, locate the installer of the previous version. Extract the installer with the “/extract” option. For example, if the installer is “emed64_14.3.1.exe”, you would run:
This will create a sub folder with file contents. Inside the folder, you will find a file with the file extension “.msi”, in this case “emed64_14.3.1.msi“.
When you uninstall, if you see the above dialog box, click the Browse button, and specify the above .msi file. Continue the process, and you should be able to uninstall the previous version.
If you are not sure which .msi file you need, you may find the information if you view the log.txt file.
If you need additional help, please email the log.txt file to our support at email@example.com with detailed information.
I want to uninstall EmEditor from one computer, and install EmEditor to another computer. Are there any procedures to follow for licensing?
You can simply uninstall EmEditor from one computer, and install EmEditor to another computer. There are no special procedures to follow for licensing.
I want to uninstall EmEditor from one computer, and install EmEditor to another computer. How can I transfer settings?
If you want to export your settings from an old computer, and import them into a new computer:
1. On an old computer, select “Import and Export” on the Tools menu, and select “Export all settings into a registry file.” Select App from Windows Settings, and select EmEditor to uninstall.
2. Copy all the exported files and subfolder to a new machine.
3. On a new computer, install EmEditor, select “Import and Export” on the Tools menu, and select “Import all settings from a registry file”.
I want to specify a new folder to install EmEditor, but it is always installed to C:/Users/(Username)/AppData/Local/Programs/EmEditor. Why can’t I specify a different folder?
By default, EmEditor is installed as a per-user install. This requires the install path to be in a user-specific folder. We recommend accepting the default install path. However, if you need to change the install path, please select a per-computer install while installing EmEditor, and select the Custom install to specify a folder.
When I try saving a file as a file name without an extension, ".txt" will be added automatically. How can I prevent an extension from being added to a file name?
Surrounding the file name with quotation marks (“”) will prevent an extension from being appended. For example, “file” will just be saved as file instead of file.txt.
When opening a file, EmEditor detects the file as a Western European even though it is actually a Japanese (Shift JIS) file.
On the File tab of Properties, uncheck Detect All if it is checked. The code page detection can make mistakes, especially with small files.
How can I close all windows at the same time?
Click X in the upper right corner of the window while pressing the SHIFT key. Alternatively, you can close all in the following ways:
- Press ALT + SHIFT + F4.
- Press ALT + SHIFT + X.
- Select Close from the File menu while pressing the SHIFT key.
- Add the Close All button on the Toolbar, and click that button.
- Click the Tray Icon and select Close All from the menu.
How can I open from the same folder in the open dialog?
Select Customize under the Tools menu, and check the Remember Last Folder check box on the Customize dialog box.
Alternatively, display the Properties for the EmEditor shortcut that you usually use to run EmEditor, and add /cd in the Target text box. For instance, if the install folder of EmEditor is “C:\Program Files\EmEditor”, enter “C:\Program Files\EmEditor\emeditor.exe” /cd. Moreover, fill the Start in text box as a folder you want to open from.
How can I save an empty file?
Choose Properties for Current Configuration under the Tools menu and on the File tab uncheck the Delete Empty Files when Saving box.
Printing font size is too small.
Choose Properties for Current Configuration under the Tools menu and click the Font button on the Print tab to customize font and size.
When reading Macintosh text files, some characters are converted to different characters. How can I read Macintosh text files correctly?
Macintosh uses slightly different code pages than Windows does. In Windows 2000/XP/2003/Vista, where Macintosh code pages are installed, you can convert Macintosh text files into Windows text files. First, select the Define Encodings command under the Tools menu. In the Define Encodings dialog box, press the New button, and select a Macintosh encoding, for example, “10001 (MAC – Japanese)”. Select an appropriate character set, for example, Japanese. Click OK twice to close dialogs.
Next, select the Open command under the File menu, select your defined encoding, for example, “10001 (MAC – Japanese)” from the Code Page combo box, and then select a Macintosh file that you would like to read.
In Windows 98/Me, where Macintosh code pages are not installed, you cannot read Macintosh text files correctly if they contain special characters that cannot be read by Windows code pages.
When using a shared folder on a network, is it possible to prevent other users from making changes to a file that I have open and I am working on?
Yes, it is possible. On the File tab of Properties, select Keep Locked from the Changed by Another Program combo box. Other users will still be able to open the file but they will not be able to save changes to the file until you have closed the file.
How do I print my document in color or in black and white?
To print in black and white, click Properties for Current Configuration under the Tools menu, click the Print tab, and then select the Ignore Color and Underlines check box. To print in color, clear the check box.
What can I do to speed up opening a very large file?
Some configurations could slow down performance. Check the following points:
- Click Properties for Current Configuration under the Tools menu, and then click the General tab. If an item other than “No Wrap” is selected in the Wrap by list, it might slow down EmEditor since it needs to compute where to wrap lines. When you open a large file, select “No Wrap”, or select the No Wrap command.
How can I paste a Japanese (or Korean, Chinese, etc.) Word document into EmEditor and save as a text file?
If Windows does not display Japanese, Korean, or Chinese fonts properly, you will need to go to Control Panel, select Regional and Language Options, click the Languages tab, and then check Install files for East Asian languages.
Open your Word document, select the text you want to copy, and then press CTRL + C to copy the text to the Clipboard.
Launch a new EmEditor window and press CTRL + V to paste the Clipboard contents to the EmEditor window. You should see the text in Japanese (or Korean, Chinese, etc.). If you cannot see the text properly, select Japanese (or Korean, Chinese, etc.) from the Font Category sub menu under the View menu. If you still cannot see it properly, select the Font command under the View menu, and select an appropriate font, for instance, MS Gothic if it is Japanese.
To save the document, select the Save As command under the File menu, and make sure you select either Unicode or UTF-8 from the Encoding drop-down list box. You may also select a locale-specific encoding such as Japanese (Shift-JIS) if you wish.
How can I open an XML file as Western European, not as UTF-8?
If an XML file is opened as Unicode, display the Current Configuration Properties, select the File tab, and check Opening Encoding drop-down list box. If this is Unicode, select System Default. If Detect HTML/XML Charset check box is checked, a “encoding=” directive specified within an XML file is searched, and EmEditor uses the specified encoding if the directive is found. Note that the encoding specified for opening files is different from the encoding specified for new files or for saving files.
How can I start a new Java file or XML file as Western European, not as UTF-8?
By default, Java files and XML files will start as UTF-8 when the New with Java or XML command is selected. You can change this default behavior by opening the Configuration Properties for Java (or XML), selecting the File tab, clicking the New Files button, and then selecting System Encoding from the Encoding drop-down list box. Note that the encoding specified for new files is different from the encoding specified for opening files or for saving files.
EmEditor is specified as an external text editor from another application. Why doesn’t the change made by EmEditor reflect the application?
If EmEditor is specified as an external text editor from another application such as a mail client program, and if the application monitors the EmEditor process for its termination and the file change, the application might not reflect an edited and saved file with EmEditor. To work around this, specify the /sp option to instruct EmEditor to be launched as a separate process. In this case, however, each EmEditor window will be displayed as a separate group.
Can I open GB18030 files?
Yes. First, go to Define Encodings on the Tools menu, click New and select GB18030 in the Encoding drop-down list. When you open a file, make sure you select this new defined encoding.
How can I convert file encodings by the command line?
Use the following command line options:
/cp Encoding — sets an encoding to open as.
/cps Encoding — sets an encoding to save as.
/sa “DestFile” — specifies a file name to save as after the encoding conversion
/ss+ — saves the file with a Unicode signature (BOM) after the encoding conversion.
/ss- — saves the file without a Unicode signature (BOM) after the encoding conversion.
For instance, if you want to convert a file from Western European (iso-8859-1) to UTF-8, use the following syntax:
emeditor.exe “windows1252.txt” /cp 1252 /cps 65001 /ss- /sa “utf8.txt”
See Encoding Constants for the list of encodings.
See Using Command Line Options for more information.
How can I open a file with a certain file extension by double clicking in Explorer?
Select the Customize command under the Tools menu. Select the File tab. Click the Associate with EmEditor button, and you can enter file extension to be associated with EmEditor.
How can I open a file exclusively?
Select Properties for All Configurations on the Tools menu (or after you open the file, select Properties for Current Configuration on the Tools menu). Select the File tab, and select Keep Locked in the Changed by Another Program drop-down list box.
Internet Explorer terminates when I view source of a local HTML file and then save the file.
On Windows XP, this issue appears when the Use Recycle Bin to Backup check box is checked in the Backup tab of configuration properties. Please clear the Use Recycle Bin to Backup check box.
What are three invalid characters at the beginning of my file?
The three characters at the top of your file is the “Byte Order Mark” of a UTF-8 file. By default, a Java file is created as UTF-8 with BOM. You can change the default code tab for new files from Java Properties > File tab > New Files button, and change the code tab to Normal ANSI, or uncheck the Add a Unicode Signature (BOM) box.
How can I select the text with the keyboard?
Press F8 to toggle normal selection mode. Press CTRL + F8 to select whole lines, and SHIFT + CTRL + F8 to toggle box selection mode. To change the keyboard settings, select Properties for Current Configuration under the Tools menu, and display the Keyboard tab.
Can I insert control characters such as form feeds?
To insert control characters on EmEditor v3, select Advanced > Insert Special Characters under the Edit menu. Alternatively, you can type corresponding keys with CTRL (+ SHIFT) only if the corresponding keys have not been assigned for shortcut keys and if the Allow Insert Control Characters is checked on the General tab of Properties.
I cannot paste text correctly when the content in the Clipboard has been copied from another application such as Netscape Navigator.
Some other applications, particularly Netscape Navigator, have problems translating text from ANSI to Unicode. Instead of using the regular Paste command, select All Commands under the Tools menu, then Edit > Paste > ANSI Paste. Alternatively, check Always Paste as ANSI on the General tab of the Current Configuration Properties dialog box.
How do I insert special characters?
Select Advanced under the Edit menu, and then select Insert Special Character. To inspect a Unicode character code you want to insert, refer to the Latin Extended Characters Reference. You can also inspect a character by using the Character Map ( Start menu > All Programs > Accessories > System Tools > Character Map) if installed in your Windows Operating System. You might need to adjust the font to display special characters properly.
See also To Insert Special Characters for the list of keyboard shortcuts.
How can I select a column block of text?
To select in a box, use the mouse to select while pressing the ALT key, or press SHIFT + CTRL + F8.
Where can I download Microsoft Global IME?
Global IME is not necessary because other language IMEs can be added from the Control Panel (Start menu > Settings > Control Panel > Date, Time, Language and Regional Options).
How can I undo inserted strings character by character using the Undo command?
By default, an entire inserted string will be undone by one Undo command. You can change this behavior by checking the Undo Character by Character check box on the Edit tab of the Customize dialog box. You will then need to restart EmEditor.
How can I sort lines in alphabetical or numerical order?
You can select the Sort A to Z, Sort Z to A, Sort Smallest to Largest, or Sort Largest to Smallest command to sort in alphabetical or numerical order. These commands can be found in the Separated Values/Sort submenu on the Edit menu.
How can I check spelling?
On EmEditor Professional v10 or later, you can check spelling without using any plug-ins. On the Context Menu of EmEditor (the right-click menu), selecting Check Spelling will enable spelling. If this menu item is not visible, you can select Customize Menus on the Tools menu, select Context Menu on the list, and then click the Reset button.
Additional dictionaries are available for download at the extensions.OpenOffice.org (http://extensions.openoffice.org/). After download a dictionary, change the file extension from .oxt to .zip, extract the Zip file, and then copy *.dic and *.aff files into the Dictionaries sub folder of the EmEditor install folder (usually %LOCALAPPDATA%\Programs\EmEditor\Dictionaries or C:\Program Files\EmEditor\Dictionaries).
How can I assign a shortcut key to insert a special character?
Many shortcut keys are already assigned to insert many special characters by default. To see which keys are assigned, go to:
and save this file as a file, for example, InsertA.jsee. Select Select… on the Macros, and select this file. Running this macro will insert this character. To assign a shortcut key to this macro, go to Configuration Properties, select the Keyboard tab, and then select My Macros from the Category drop-down list, and assign your favorite key to the macro.
The Find Matching Parenthesis/Bracket command doesn’t work. How can I enable this command?
Please go to the Highlight (2) tab of configuration properties, and then check all items in the “Bracket Pairs” list so you can use CTRL+] to jump to the matching bracket.
The sort commands may become disabled. What are the conditions that disable the sort commands?
The sort commands become disabled when any of the following conditions is met:
(1) Filter is on.
(2) The document is open as read-only.
(3) The selection contains a read-only CSV headings.
(4) The selection contains outside of text specified by the Narrowing command.
Are there Undo and Redo commands for the cursor position?
Yes, they are called the Back and Forward commands.
On the default keyboard shortcut, you can use the Back (ALT + LEFT) and Forward (ALT + RIGHT) keys.
The buttons for these commands can be added to a toolbar.
The paste command doesn’t work.
Please check Anti-Virus software. Sometimes, anti-virus programs block applications to access the Clipboard, and in that case, you will have to explicitly exclude EmEditor from blocking the Clipboard access.
How can I disable CSV detections?
Select Properties for Current Configuration on the Tools menu, select the File page, and clear all the check boxes in the CSV files to detect list box.
How can I enable TSV (tab-separated) file detections?
Select Properties for Current Configuration on the Tools menu, select the File page, and enable the Tab-separated check boxes in the CSV files to detect list box.
How can I disable adjusting column positions when opening CSV files?
Select Customize on the Tools menu, select the CSV page, and clear the Adjust Separator Positions Automatically check box.
How can I filter a column by a certain range of numbers?
In the Filter toolbar, click “[ , ]” (Use Number Range) button, and enter a number range if the Enter Number Range dialog box appears. If the dialog box does not appear, enter a number range in the “[min , max]” format in the Filter toolbar, and press the ENTER key.
How can I round numbers in a column to 2 decimal places?
Select a whole column where you want to round numbers. Select Replace on the Search menu (or press CTRL + H) to bring up the Replace dialog box. Click the Number Range radio button. Clear the Integers Only option, leave Minimum and Maximum fields empty, and click OK if the Enter Number Range dialog box appears. Make sure “[ , ]” is set in the Find field. In the Replace with field, enter “\J parseFloat( \0 ).toFixed(2)”. Make sure “In the Selections Only” option is enabled, and click the “Replace All” button.
How can I display only empty cells in a column?
Right-click on an empty cell, and select Filter in Column from the context menu.
How can I open Excel files with EmEditor?
Excel files are binary files, and you can’t open Excel files directly with EmEditor. However, there are several ways to achieve this task.
- Open an Excel file with Excel, and save it as a text file (Tab delimited or Comma delimited). Then open the text file with EmEditor.
- Use an Excel add-in, CSV Import+Export to export an Excel file as a CSV file, and then open the CSV file with EmEditor.
- Open an Excel file with Excel, press CTRL + A, and CTRL + C to select and copy all data to the Clipboard. Launch EmEditor, select the Tab-separated mode from the CSV/Sort toolbar, and press CTRL + V to paste.
How can the Find dialog box show the previously searched string, not the word at the cursor?
On the right side of the Find drop-down list box, click the > button to display a menu, and select the Last Used Value.
How can I erase all the previous words in the Find box?
Click Clear History Now in the bottom of the Customize dialog box, by choosing Customize under the Tools menu. If you want to delete only a certain item from the search history, select the item you want to delete in the Find drop-down list, then press ALT + DELETE.
How can I search for a word at the beginning of lines or a word at the end of lines?
The beginning of a line can be represented as “^” and the end of lines can be represented as “$” if you check Use Regular Expressions in the Find dialog box. Enter “^Search String” in Find field if you want to find “Search String” at the beginning of lines, or “Search String$” if you want to find “Search String” at the end of lines.
A new line can be also represented as “\n” if you check Use Escape Sequence. Enter “\nSearch String” in Find field if you want to find “Search String” at the beginning of lines, or “Search String\n” if you want to find “Search String” at the end of lines.
What are examples of regular expressions?
Please see EmEditor FAQ: Regular expressions examples.
Why doesn’t EmEditor highlight multi-line strings?
EmEditor has been designed to highlight strings line by line, rather than highlight strings containing new lines, in order to increase the performance of the program.
Why is the Find/Replace dialog box so big?
The Find/Replace dialog box allows resizing by dragging the right bottom corner with the mouse.
How can I enter a multiple-line string as a search string in the Find/Replace dialog box?
On the right side of the Find drop-down list box, click the > button to display a menu, and select the Multiline. Moreover, drag the right bottom corner of the dialog box so the text box allows multiple lines. In order to enter a new line, use CTRL + ENTER.
The cursor shape used to look like ‘I’ but now it looks like a solid rectangle. When I type a letter, it is not inserted but overwrites an existing character. What happened?
“Overwrite” mode is turned on. Press the Insert key on your keyboard to toggle “Overwrite” mode.
Can I display single-byte spaces as any marks?
Yes. On the Marks tab of Properties, check the Show Spaces check box.
When I open a file using the default settings, it becomes unreadable, and if I choose another character set from the Font Category sub menu under the View menu, it becomes worse. But if I select a proper encoding when I open the file, it works. Why?
EmEditor’s internal processing is Unicode. EmEditor converts ANSI text to Unicode text when you open an ANSI file. When opening a file, you should select an encoding in the Open dialog box. If you don’t select an encoding, EmEditor defaults the file to the system default encoding. In order to open a file with a different encoding, you need to select the desired encoding when you open the file. You can later change the encoding by choosing the Reload command under the File menu choose an encoding to reload the file as.
When do I use Font Category under the View menu?
EmEditor cannot detect a language from Unicode files. You will have to manually choose a Font Category under the View menu to display a non-default character set in a Unicode file correctly. When creating a new file with a language other than default character set, you also need to select the Font Category you want to use.
How can I display continuous line numbers from page to page? I never had this problem, but now something changed in my configuration.
On the General tab in the Current Configuration Properties dialog box, uncheck the Display Page Number check box.
What are logical coordinates and display coordinates? What is a logical line?
Logical coordinates refer to the coordinates in a document regardless of the wrap mode in use. Returns due to the wrapping of lines are not counted. Logical lines refers to the number of lines, discounting lines formed by wrapping, in a document. Display coordinates, on the other hand, include wrapped lines in their sum.
I display line numbers on the left edge of EmEditor window. When a line is wrapped, I do not want to see the line number incremented within the logical line. How do I configure this behavior?
On the General tab in the Current Configuration Properties dialog box, select one of the logical coordinates options from the Line and Column Display as combo box.
I don’t like the new toyish Windows XP style toolbars. Can I use the old toolbar buttons?
Yes. Select Customize Toolbar from the Tools menu, and select 16 color.
Can I change the Tray Icon on the Task bar to my favorite icon?
Yes. Run Registry Editor (RegEdit.exe), and find HKEY_CURRENT_USER\Software\EmSoft\EmEditor v3\Common. Create a TrayIconFile value as REG_SZ and set the icon file path, and TrayIconIndex value as REG_DWORD and set the icon index.
How can I highlight previously searched strings more than once with different colors?
On the Display tab in the Current Configuration Properties dialog box, enter how many times you want to highlight in the Search Colors edit box. To highlight with different colors, scroll down to the bottom of the Specify Part list box, select Search string (1), (2), …, and click on Background Color or Text Color to select new colors to display searched strings.
How can I display an underline at the cursor position?
On the Scroll tab in the Current Configuration Properties dialog box, check Horizontal Line.
How can I display URLs without breaking at specific characters (such as , (comma))?
On the Link tab in the Current Configuration Properties dialog box, add characters you don’t want to break URLs (such as , (comma)) to Recognize These Characters.
The cursor vertical line is thin. Can it be thicker?
In Windows Vista, select Optimize Visual Display in Control Panel, and select a greater number in the Set the Thickness of the blinking cursor drop-down list.
In Windows XP, select Accessibility Options in Control Panel, select the Display tab, and adjust the Width under the Cursor Options.
How can I find the number of the words in the selection?
You can use the Word Count plug-in, which is included in EmEditor Professional 6.00.1 or later. If you use EmEditor Standard, you can download the plug-in from the library.
How can I decode Numeric Character References ("x") in Unicode characters?
You can select the Edit menu – Convert Selection – Others – HTML/XML Character Reference to Unicode.
How can I find the return type (e.g. CR, LF, CR+LF) for each line?
If you set the Character Code at Cursor checkbox in the Status tab of the Customize dialog box, and when the cursor is at end of any line, you will see 0D+0A (CR+LF) or 0D (CR only) or 0A (LF only). You can also check the Show CR and LF with Different Marks in the Marks tab of Properties to distinguish the return types. Since each line can have different return types in EmEditor, this is how EmEditor displays the return types for each line.
How can I add the Marks button to the Toolbar?
Double click on the toolbar (the basic one) border, and the Customize Toolbar dialog will appear, where you can select the Marks button and add it to the toolbar. Alternatively, you can select Customize Toolbar on the Tools menu, and then double-click the Toolbar 1 in the Toolbars list, where you can select the Marks button and add it to the toolbar.
How can I display line numbers?
Select Properties for Current Configuration on the Tools menu, click the General tab, and check Show Line Numbers.
In XHTML and XML documents, XML files, text inside a tag and the matching tag at the cursor becomes highlighted. Can you stop this behavior?
Yes, in the HTML and XML configuration properties, go to the Highlight (2) tab
and clear the Highlight Matching Tag check box.
How can I change the user interface language?
Please go to the Customize dialog, Language tab, and you can change the user interface language.
A backslash character is sometimes displayed as a Japanese Yen or Korean Won mark. When I copy a backslash character to the Clipboard, and paste it to a certain web page, it becomes a Japanese Yen or Korean Won mark. Is this a bug?
No. Depending on a font you use, a backslash character (U+005C) can be displayed as a Japanese Yen or Korean Won mark. Please read Yen and yuan sign for historical reasons.
Different fonts are used when opening different files, or the font used for a new file is different. How can I always use the same font?
Select “Properties for All Configurations” on the “Tools” menu, select the “Display” page, click the “Font” button, and the “Customize Font” dialog box appears. Click the “Select All” button, and click the “Change” button in the “Display Font” box, and select the font you want to use.
How can I display emoji in full colors?
Please select “Customize” on the “Tools” menu, and ensure the “Use DirectWrite” option is set in the “Text Rendering” page.
How can I select large icons for toolbars?
Select Customize Toolbars on the Tools menu, and select Use Large Icons.
How can I add an icon to the toolbar?
Double-click the toolbar, or select Customize Toolbars on the Tools menu, and select the Toolbar 1 you from the list, and click Customize. A dialog box appears, where you can add new icons.
How can my favorite mail software run when clicking mail address?
The e-mail program you want to use needs to be the default e-mail software. You can find an option to set the default e-mail software under Settings > Control Panel > Internet Options > Programs. If not found, in Explorer, select Options under the View menu, and select the File Types tab. Select URL:MailTo Protocol, double-click open, and enter the mail software path and options on Application used to perform action. Refer to the e-mail program help because the options depend on each mail software. Some e-mail programs do not support this function.
Clicking URLs will not run my favorite web browser.
After installing a second browser, you will be given the option to set the second browser as the default browser. Clicking a URL on EmEditor will start the second web browser at this point.
How can I make the year 4 digits when you insert dates?
Customize the date format in the Locale, Control Panel. This specification is the same as Notepad.
How can I open the Input Method Editor (IME) automatically when running EmEditor?
To open the IME automatically when running EmEditor, choose Properties for Current Configuration under the Tools menu and check the Run Input Method Editor check box on the General tab.
How can I copy configuration properties on one machine to another?
You can copy them if you write the HKEY_CURRENT_USER\Software\EmSoft\EmEditor v3 key to a file by Registry Editor (Regedit.exe), copy the file to the other machine, and read the file by Registry Editor. You might need to change the folder names in the Properties by yourself.
Why is there no ASP configuration?
What is "HTML" and "HTML-Embedded" in Special Syntax combo box on the Highlight (2) tab of Properties?
Can EmEditor encode Unicode characters as "Numerical Character References" (NCRs - those x; codes) when saving HTML or XML files?
Yes. On the File tab in Properties, click Saving button, and check Save Unicode as HTML/XML Character Reference. You can also click Use Named Entity Reference if you would like to save named entity references such as ©. For HTML and XML configurations, these checkboxes are checked by default. However, EmEditor currently cannot decode or display NCRs as real Unicode characters when loading HTML or XML files.
There is no encoding available in the Reload sub menu under the File menu except Same Encoding, Detect All, System Default, UTF-16LE, UTF-16BE, UTF-8, and UTF-7. How can I add more code pages?
If you do not install EmEditor properly, but just copy emeditor.exe from another PC and run it, some system encodings will not be available in your copy of EmEditor. To setup additional system encodings, you can logon with Power User or Administrator privileges if you use Windows NT/2000/XP, and select the Define Encoding command from the Tools menu, and click the Reset button. Encoding availability depends on which language system files you install in your copy of Windows. If you cannot find a particular encoding from within EmEditor, you can install additional language files from Control Panel – Regional and Language Options. After language system files are installed in your copy of Windows, select the Define Encoding command from the Tools menu, and click the Reset button.
After updating EmEditor to the newest version, how can I add the new commands to a menu or add the new keyboard shortcuts?
If the new commands do not show up in a menu, select Customize Menus under the Tools menu, and click on the Reset button to reset the menus to their defaults. To add new command shortcuts, click on the Reset button in the Keyboard tab of Properties for All Configurations.
How can I define two-keystroke keyboard shortcuts?
You can define two-keystroke keyboard shortcuts by using a combination of the user menu features and the keyboard mapping features. By default, CTRL+K is predefined for the first key of two-keystroke shortcuts using User Menu (1).
Some of the predefined shortcuts include:
CTRL+K, K Toggle Bookmark
CTRL+K, N Next Bookmark in this Document
CTRL+K, P Previous Bookmark in this Document
CTRL+K, L Clear All Bookmarks in this Document
CTRL+K, C Comment Selection
CTRL+K, U Uncomment Selection
In this list, the second key can be activated with or without CTRL key. For instance, the Toggle Bookmark command can be activated by pressing K with CTRL, and then K again with or without CTRL.
To add new two-keystroke shortcuts:
1. On the Help menu select Keyboard Map.
2. Click to select the All Configurations button on the Toolbar, if you want all of the configurations to use the same shortcuts (or deselect it to not use the same shortcuts).
3. Scroll down the list to User Menu (2) and double-click.
4. In the Configuration Properties, type a shortcut in the text box, Press a New Shortcut Key. For instance, CTRL+;.
5. Click the Assign button, and click OK.
6. Close the Keyboard Map window.
7. Next, on the Tools menu select Customize Menus.
8. Select User Menu (2) on the Menu to Customize list.
9. Click the Insert Right button.
10. In the Menu Properties, select a new command to assign a shortcut to.
11. On the Name text box, use & to specify a new shortcut key.
12. The character to the right of & specifies the second character.
For instance, if you want to add New and Paste command and set “N” as the second shortcut key:
1. Select File in the Category list.
2. Select New and Paste in the Command list.
3. Type &New and Paste in the Name text box.
4. Click OK.
Repeat this procedure to define as many commands as you prefer.
By default, the user menu will appear 1 second after the first key is pressed. Second shortcut keys work before the user menu appears. You can change the delay time for each user menu by adjusting the Delay Time slider on the bottom of the Customize Menus dialog box.
CTRL + Mouse Wheel can change the font size, but can you disable this?
In the Customize dialog box, the Mouse tab, clear the “CTRL + Wheel to Change Font Size” check box.
Double-clicking a tab causes to create a new window. Can you disable this behavior?
Yes. please go to the Mouse tab of the Customize dialog box.
If the “New Group” is selected for the Left Mouse Button Double-Click, select “Undefined”.
How can I run an external compiler from EmEditor to compile the current file?
See FAQ: What are examples of External Tools configuration? –> Compile by Visual C++ section.
How can I do a Google search for the word at the current cursor position?
Select the Customize Tools command, select the New button and enter “http://google.com/search?q=$(CurText)” in the Command text box.
I want to compile the opened file with an external tool in Command Prompt, but how can I keep the Command Prompt window from closing after the compilation is finished?
Select the Customize Tools command, and select the New button and enter “cmd.exe” in the Command text box, and “/k “filename” $(Path)” in the Arguments text box.
What are examples of External Tools configuration?
- Open Internet Explorer
Command: C:\Program Files\Internet Explorer\iexplore.exe
Initial Directory: $(Dir)
Icon Path: C:\Program Files\Internet Explorer\iexplore.exe
Check Save File
- Open Explorer
Initial Directory: $(Dir)
Icon Path: %WinDir%\explorer.exe
- Open Command Prompt
Initial Directory: $(Dir)
Icon Path: %WinDir%\system32\cmd.exe
- Compile by Visual C++
Arguments: /k “C:\Program Files\Visual Studio\Vc7\bin\vcvars32.bat”&&cl $(Path)
Initial Directory: $(Dir)
Icon Path: C:\Program Files\Visual Studio\Common7\IDE\devenv.exe
Check Save File
- Run associated program
Initial Directory: $(Dir)
Check Save File
- Search Google for a word at cursor or a selected text.
- Check out from Microsoft Visual SourceSafe
Arguments: /k C:\(SourceSafe path)\Common\VSS\win32\SS.EXE checkout $/(path)/$(Filename).$(Ext) -y(user name)
Initial Directory: $(Dir)
Icon Path: C:\(SourceSafe path)\Common\VSS\win32\SSEXP.EXE
- Check in to Microsoft Visual SourceSafe
Arguments: /k C:\(SourceSafe path)\Common\VSS\win32\SS.EXE checkin $/(path)/$(Filename).$(Ext) -y(user name)
Initial Directory: $(Dir)
Icon Path: C:\(SourceSafe path)\Common\VSS\win32\SSEXP.EXE
Check Save File
You can use the following predefined arguments in Command, Arguments, Initial Directory, and Icon Path.
$(Path) The full path name of the file.
$(Dir) The directory name of the file.
$(Filename) The file name without its extension.
$(Ext) The file name extension.
$(CurLine) The logical line number of the cursor.
$(CurText) The selected text if selected, or the word at the cursor if not
You can also specify environment variables, such as %WinDir%
Can I use the VBScript MsgBox function?
No. However, you can use the Popup method of the WshShell. You can also use the alert method or confirm method instead.
See Also Display a Message Box
Can I save multiple macros to files?
Yes. You can save multiple macros to files by using the Save Macro command.
What is the split window for?
Sometimes it is convenient when you are writing at the bottom of the text, to view the top of the text at the same time. You cannot open a different file on each pane of the split window.
How can I save the EmEditor window size, and always open EmEditor windows at the same size?
First resize the EmEditor window to the desired size, then select the Customize command from the Tools menu, select the Window tab, click the Save Current Window Position button, and then click OK.
How can I always open EmEditor windows at the maximized size?
First maximize the EmEditor window, then select the Customize command from the Tools menu, select the Window tab, click the Save Current Window Position button, check the Restore Window Position check box, and then click OK.
How can I save the current positions of all EmEditor windows, and open all the windows at the same positions next time?
Left click the mouse button on the Tray Icon to display the Tray Icon menu, and select the Save Workspace command to save file names and cursor positions of the current workspace. Next time you can select the Restore Workspace command to restore the previously saved windows with the same file name and cursor positions.
You can also use the Save Workspace and Close All command to close all windows after saving the workspace, or use the Save Workspace, Save, and Close All command to save and close all windows after saving the workspace.
How can EmEditor display as if it were a tabbed window?
Select the Enable Tabs command so it is checked.
Why doesn’t the Cascade or Tile command work?
When the tab is enabled, selecting the Cascade command or one of the Tile commands does not disable the tab. These commands cascade or tile only when multiple groups exist. Therefore, these commands make no sense when only one group exists. This change has been made due to users’ request. To cascade or tile as the previous manner, disable the tab first, then select one of these commands. New Horizontal Group and New Vertical Group commands allow you to tile windows even if only one group exists.
How can I make the EmEditor window stay open when I close the last open document?
Select the Customize on the Tools menu, select the Window tab, and check the Do Not Close Last Document by Selecting Close Command check box.
Is there a way to make EmEditor move through document tabs in sequential order from left to right?
Yes. Select Customize on the Tools menu, then select the Window tab, and clear the Switch to Last Used Document for Next Document Command check box. When unchecked, you can switch between the tabbed documents in order from left to right, or right to left, using CTRL+TAB, or CTRL+SHIFT+TAB respectively. When checked, pressing CTRL+TAB and CTRL+SHIFT+TAB, switch back and forth between the active document and the last viewed document.
How can I make the HTML toolbar displayed when an HTML file is active?
Right-click on the HTMLBar button on the Plug-ins toolbar, and select Properties on the menu (Or, select Customize Plug-ins in the Tools menu > Plug-ins, double-click on the HTMLBar in the list). Set the Automatically display the HTML Bar for selected configurations check box, and then the HTML toolbar will be displayed only when files with the configurations checked in the list are active.
Purchase and Update
If I purchase EmEditor, can I get the newer version for free? Or do I have to pay for the registration fee every time I get a new version?
If you purchase a lifetime license, you will get all the new versions for free.
If you purchase an annual subscription, you will get all the new versions for one year after your purchase date. After one year, you will need to renew your subscription in order to continue using EmEditor.
How can I find out the version number of the currently installed EmEditor and the expiration date of my maintenance plan?
Go to the Help menu in EmEditor, select the About EmEditor command. The About EmEditor dialog box should then appear. You can find version information in the upper part of the dialog box. The type and expiration date of your license can be found in the User Registration Information box.
What is the difference between Annual Subscription and Lifetime License?
Annual Subscription allows you to use EmEditor when the subscription is valid. After the subscription expires, you will need to renew your subscription in order to continue using EmEditor.
Lifetime License allows you to get all the new versions for free during the lifetime of the product.
When I try to update EmEditor, I see the dialog box that says "You might need to purchase an upgrade." How do I know if I need to purchase an upgrade?
Please go to Resend Keys page and enter the email address you used to purchase EmEditor. Our system will send a list of all the available keys to you, including the key of the latest version if your license is eligible.
You can also go to the Help menu in EmEditor, select the About EmEditor command. In the About EmEditor dialog box, click the Extend Maintenance Plan button and you will be guided to renew your subscription.
How can I report a crash?
If EmEditor crashes, a crash report file will be created usually in the C:\ProgramData\Emurasoft\EmEditor\Error folder. Please email the most recent file (compressed to a Zip archive) to firstname.lastname@example.org as an attachment with the detail information including procedure to reproduce your issue.
When I try to launch EmEditor, it is trying to load very large files. Can you disable this?
EmEditor is trying to load the last used workspace. In the Command Prompt, run:
and the last used workspace will be erased, and an untitled EmEditor window will be launched.
When updating EmEditor, an error occurs and a system restart becomes required.
When updating EmEditor, the installer displays the following message, and a system restart may become required.
“The installer has insufficient privileges to access this directory: C:Program FilesEmEditor. The installation cannot continue. Log on as administrator or contact your system administrator.”
It is possible that another application is holding the EmEditor install folder as opened. It is recommended that you close all applications before updating EmEditor. In particular, Brother Control Center (BrCtrlCntr.exe), which comes with Brother printers, might open the EmEditor folder, and thus close the Control Center you might find in the Taskbar Notification Area.
If the problem persists, use Process Explorer and search for any open handles to the EmEditor install folder.
Usually the system asks for a system restart only as a last alternative, and this is basically done so that the system can free up the resources that need to be updated. Especially when a system restart is prompted, use Process Explorer and search for any handles to C:Program FilesEmEditor.
An Error message similar to "The paging file is too small for this operation to complete" appears when I try opening a very large file. How can I fix this error?
You will need to increase the physical or virtual memory to open a very large file. We recommend increasing the physical memory (RAM) in your PC first. If the error still persists or if you are unable to increase the physical memory, we recommend increasing the virtual memory. To increase the virtual memory, please follow the steps below:
1. Press Win(⊞)+R keys to bring up the “Run” dialog box, and enter “SystemPropertiesPerformance.exe” to display the “Performance Options” dialog box.
2. Select the “Advanced” tab of the “Performance Options” dialog box.
3. Click the “Change” button in the “Virtual memory” box.
4. Clear the “Automatically manage paging file size for all drives” check box.
5. Select the “Custom size”, and enter recommended numbers to “Initial size (MB)” and “Maximum size (MB)” boxes. We recommend entering a same large number to both “Initial size (MB)” and “Maximum size (MB)” boxes. For example, enter 80000 to both boxes.
6. Click OK and restart Windows.
7. Try opening the large file with EmEditor again. If the error persists, please repeat the above steps to increase the virtual memory size until the error disappears.
Where can I download the free version of EmEditor (EmEditor Free)?
EmEditor Free and EmEditor Professional use the same binary program.
You can download EmEditor Free/Professional at the download page.
After you install EmEditor, you can select the “Downgrade” command to downgrade to the Free version.
The Downgrade command can be found by typing “Downgrade” in the Quick Launch window (Ctrl+Q).
Please see the description how to switch between the Professional version and the Free version.
Where can I download older versions of EmEditor?
The installer of the previous version can be found in one of the C:\ProgramData\Emurasoft\EmEditor\updates\update… folders