EmEditor v20.8.0 released!

/in /by

Today, we are releasing EmEditor v20.8.0.

Please see EmEditor v20.8 New Features for details and screenshots.

This release also includes following bug/issue fixes.

  • Fixed a pre-v20.7 bug of a potential crash while opening a file in Binary (Hexadecimal View) and with DirectWrite.
  • Fixed a pre-v20.7 issue where the Ctrl+Wheel rotation direction in Print Preview was opposite.
  • Fixed a pre-v20.7 potential crash in Minimap.
  • Fixed a pre-v20.7 potential crash in DirectWrite mode.
  • Fixed a pre-v20.7 CSV separator counting issue.
  • Fixed customer reported issues (1, 2, 3, 4, 5, 6).

If you use the Desktop Installer version, you can select Check for Updates on the Help to download the newest version. If this method fails, please download the newest version, and run the downloaded installer. If you use the Desktop portable version, you can go to the Download page to download the newest version. The Store App versions can be updated through Microsoft Store (64-bit or 32-bit) after a few days.

Thank you for using EmEditor!

New page – How to Increase Virtual Memory

/in /by

If an error message similar to “The paging file is too small for this operation to complete” or “Your computer is low on memory” appears while opening a very large file, you will need to increase the physical or virtual memory. This new page explains how to increase virtual memory on your system.

How to Increase Virtual Memory

EmEditor v20.7.2 released!

/in /by

Today, we are releasing EmEditor v20.7.2.

Updates from v20.7.1 include:

  • Fixed a v20.6-20.7 bug where the Updater failed to install a newer version if the EmEditor install path includes a space (read the bold sentence below to overcome this issue).
  • Fixed a v20.7 bug where repeating VBScript macros might crash EmEditor.
  • Fixed a v20.7 bug where the TAB was invisible in TSV while the Cell selection mode is off (DirectWrite off).
  • Fixed a v20.7 bug where the TAB was visible in TSV while the Cell selection mode is on (DirectWrite on).
  • Fixed a pre-v20.7 bug where clicking the Replace button in the Replace dialog with a Number Range (Integers Only) might not have jumped to the next found position correctly after a replace.

Please see EmEditor v20.7 New Features for details and screenshots.

If you use the Desktop Installer version, you can select Check for Updates on the Help to install the newest version. If this method fails, please download the newest version, and run the downloaded installer. If you use the Desktop portable version, you can go to the Download page to download the newest version. The Store App versions can be updated through Microsoft Store (64-bit or 32-bit) after a few days.

Thank you for using EmEditor!

EmEditor v20.7.1 released!

/in /by

Today, we are releasing EmEditor v20.7.1.

Updates from v20.7.0 include:

  • Fixed a v20.6-20.7 bug where the Updater failed to install a newer version on Windows 7.
  • Fixed a v20.7 bug where the Use editor font option in the Batch Find in Files dialog box did not work.
  • Enabled the use of the DirectWrite mode in the Store App versions.
  • Fixed an issue where the OK button became disabled if the Lines text box contained commas in the Numbering dialog box.
  • Fixed a pre-v20.6 issue where the Number of Lines text box might contain commas by default.
  • Fixed customer reported issues (1,2,3,4,5).

Please see EmEditor v20.7 New Features for details and screenshots.

If you use the Desktop Installer version, you can select Check for Updates on the Help to download the newest version. If you use the Desktop portable version, you can go to the Download page to download the newest version. The Store App versions can be updated through Microsoft Store (64-bit or 32-bit) after a few days.

Thank you for using EmEditor!

EmEditor v20.7.0 released!

/in /by

Today, we are releasing EmEditor v20.7.0.

Please see EmEditor v20.7 New Features for details and screenshots.

This release also includes following bug/issue fixes.

  • Fixed a pre-v20.6 bug where EmEditor could crash on the Split Column command under a certain condition.
  • Fixed a pre-v20.6 issue related to double-clicking on URIs.
  • Fixed a pre-v20.6 issue related to invalid CSV parsing.
  • Fixed a v20.6 bug where URLs did not become active in the Free version.
  • Fixed a pre-v20.6 bug where drag and drop while in the vertical selection mode could crash.
  • Fixed a v20.6 issue where a tooltip in the Macros toolbar might have included all languages.
  • Fixed a pre-v20.6 bug where EmEditor might crash when displaying the minimap if a very long line exists.
  • Fixed a pre-v20.6 bug in the Filter/Filter in Column commands.

If you use the Desktop Installer version, you can select Check for Updates on the Help to download the newest version. If you use the Desktop portable version, you can go to the Download page to download the newest version. The Store App versions can be updated through Microsoft Store (64-bit or 32-bit) after a few days.

Thank you for using EmEditor!

EmEditor v20.6.1 released!

/in /by

Today, we are releasing EmEditor v20.6.1.

Updates from v20.6.0 include:

Please see EmEditor v20.6 New Features for details and screenshots.

If you use the Desktop Installer version, you can select Check for Updates on the Help to download the newest version. If you use the Desktop portable version, you can go to the Download page to download the newest version. The Store App versions can be updated through Microsoft Store (64-bit or 32-bit) after a few days.

Thank you for using EmEditor!

EmEditor v20.6.0 released!

/in /by

Today, we are releasing EmEditor v20.6.0.

Please see EmEditor v20.6 New Features for details and screenshots.

If you use the Desktop Installer version, you can select Check for Updates on the Help to download the newest version. If you use the Desktop portable version, you can go to the Download page to download the newest version. The Store App versions can be updated through Microsoft Store (64-bit or 32-bit) after a few days.

Thank you for using EmEditor!

EmEditor v20.5.6 released!

/in /by

Today, we are releasing EmEditor v20.5.6.

Updates from v20.5.5 include:

  • Fixed a v20.5.5 bug where EmEditor could crash after the Filter command under a certain condition.
  • Fixed a pre-v20.5 bug related to recording a macro for the Replace (Extract) command.

Please see EmEditor v20.5 New Features for details and screenshots.

If you use the Desktop Installer version, you can select Check for Updates on the Help to download the newest version. If you use the Desktop portable version, you can go to the Download page to download the newest version. The Store App versions can be updated through Microsoft Store (64-bit or 32-bit) after a few days.

Thank you for using EmEditor!

EmEditor v20.5.5 released!

/in /by

Today, we are releasing EmEditor v20.5.5.

Updates from v20.5.4 include:

  • Improved the speed when a very long line exists and the line is wrapped.
  • Fixed a pre-v20.5 bug where EmEditor could crash when opening a very large file with very long lines.
  • Fixed a pre-v20.5 bug related to recording a macro for the Batch Replace command.
  • Fixed a v20.5 bug where the Print Preview might have crashed if no printers were available.
  • Fixed a v20.5 bug where the Print Now command did not work.
  • Fixed a pre-v20.5 bug where EmEditor could crash if URL is highlighted under a certain condition.
  • Fixed a v20.5 bug where the Percentage of Physical Memory in Use was hidden in the status bar.

Please see EmEditor v20.5 New Features for details and screenshots.

If you use the Desktop Installer version, you can select Check for Updates on the Help to download the newest version. If you use the Desktop portable version, you can go to the Download page to download the newest version. The Store App versions can be updated through Microsoft Store (64-bit or 32-bit) after a few days.

Thank you for using EmEditor!

EmEditor v20.5.4 released!

/in /by

Today, we are releasing EmEditor v20.5.4.

Updates from v20.5.3 include:

  • Fixed a pre-v20.4 bug where opening and saving a very large UTF-8/UTF-16 with Signature (BOM) file could remove a few bytes from the file.
  • Fixed a pre-v20.4 bug where EmEditor could crash when opening a binary file and canceling the Retry dialog box.
  • Fixed a v20.5 bug where highlighting could be disabled for a very large file.
  • Fixed a v20.5.3 bug where an empty item existed in the notification page of the Customize dialog box.

Please see EmEditor v20.5 New Features for details and screenshots.

If you use the Desktop Installer version, you can select Check for Updates on the Help to download the newest version. If you use the Desktop portable version, you can go to the Download page to download the newest version. The Store App versions can be updated through Microsoft Store (64-bit or 32-bit) after a few days.

Thank you for using EmEditor!